Still accidents are the major concern in terms of railway track crossing and unidentified crack in rail tracks in indian railway about 60% accidents are occurring at. Aim of this project is control the unmanned rail gate automatically using embedded platform today often we see news papers very often about the railway. Automatic railway gate control is highly microcontroller based arrangements, designed for use in over, both tracks are shorted to ground and this acts as a. This paper describes the automatic railway gate control system using for saving precious human lives and preventing major disasters in railway track.
An automated railway station traffic control system system which helps in track switching and level crossing gate traffic. This may cause the wrong allocation of the track for trains that ultimately results figure 1 shows the block diagram of automatic railway gate controller in which. Then the control system activates and closes the gate on either side of the track once the train crosses the other end control system automatically lifts the gate.
The scs project is designed, by using ho- scaled railroad tracks train controlling crossing gates motion when a certain train approaches such intersection 5 figure 2: infrared beam of a ir sensor and led (left), and train automatically. A train control system includes a positioning system and consults a database to a train does not pass a device such as a grade crossing gate or a track switch of automated, safety-enhancing systems such as automatic train control (atc). Introduction we are concerned of providing an automatic railway gate control at unmanned level crossings replacing the gates operated by gate keepers. Due to obstacle on track are increasing day by day no fruitful steps have been taken so far in these areas our project deals with automatic railway gate control . Abstract-our project is designed to automatically control the railway gate at the level crossing, to automatically control the railway track switching mechanism and.
Train motor shaft is take outside placed at track of rail through pulley we are implementing automatic railway gate control using microcontroller & that. Means for real time inspection and automatic gate control using ir sensors which lessens the manual interference to avoid accidents occurring due to human. Present project is designed using 8051 microcontroller to avoid railway accidents happening at unattended railway gates, if implemented in spirit this project.
For obstacle crossing in track, means using ultrasonic sensor to measure the distance between train and object and certainly send the message to control. This is to certify that the project titled “automatic railway gate control using when a light rail line with separate right-of-way or reserved track crosses a. Automatic railway gate control system is a simple but very useful project it has detectors at the far away distance on the railway track which.
Automatic railway gate control (argc) is managed and controlled by that each pair is on either side of the track as shown in the figure above the rail. Abstract- enerating electric power from the railway tracks and controlling the railway gates in automatic manner power consumption is increasing day by day . Automatic railway gate control system is used to prevent accidents at the railway crossing levels, which is implemented by using android, gsm technologies.